Features • Fully USB 1.1 compliant low-speed device, except handling of communication errors and electrical specifications. • demonstrate device and host driver implementations on Linux, Mac OS X and Windows.

Fix common Atmel driver problems using these step by step instructions. Atmel Drivers Download by Atmel Corporation. Free Download >> ATMEL USB FastVNET (A.

• Supports multiple endpoints: one control endpoint, two interrupt/bulk-in endpoints and up to 7 interrupt/bulk-out endpoints. (Note that the USB specification forbids bulk endpoints for low speed devices, but V-USB supports them to some degree.) • Transfer sizes up to 254 bytes by default, more as configuration option. • Comes with freely usable USB identifiers (Vendor-ID and Product-ID pairs). • Runs on any AVR microcontroller with at least 2 kB of Flash memory, 128 bytes RAM and a clock rate of at least 12 MHz.

Free download seas0npass filesystem patch failed programs. • No UART, timer, input capture unit or other special hardware is required (except one edge triggered interrupt). • Can be clocked with 12 MHz, 15 MHz, 16 MHz 18 MHz or 20 MHz crystal or from a 12.8 MHz or 16.5 MHz internal RC oscillator. • High level functionality is written in C and is well commented. • Only about 1150 to 1400 bytes code size. • You can choose the License: Open Source or commercial.

Click for details. Benefits over Alternative Solutions Why not choose a microcontroller with built-in USB hardware? There are several of these available (see ). Or combine the microcontroller of your choice with a USB chip? Advantages over Microcontrollers with USB Hardware • Standard AVR controllers are usually easier to obtain. • Most of the controllers with USB support are only available in SMD, which is almost impossible to handle for hobbyists.

• V-USB comes with a free shared Vendor- / Product-ID pair. • A good free ANSI-C compiler (GNU gcc) and a free development system for Windows (WinAVR) are available for AVR. • AVR controllers are faster than most of the controllers with integrated USB and cost less.

• Stand-alone operation: Some of the USB controllers download their firmware from the host computer into RAM. They don’t work without connection to the host. • AVR controllers have on-chip EEPROM. Advantages over separate USB Peripheral • No additional cost.

• No additional hardware complexity: simpler PCB, less failures. • More freedom in the choice of USB descriptors. • V-USB comes with a free shared Vendor- / Product-ID pair. • Little hardware resources used: only two to three I/O pins.

• USB chips are often hard to obtain. Advantages over other Firmware-Only Implementations A similar driver for the AVR series of microcontrollers is available from. Our USB driver has the following advantages over Igor’s driver: • All customizable code written in ANSI-C and thus easier to maintain. • Modular concept: easier to integrate into existing designs. • Slightly smaller code size in spite of high level language modules.

• Faster: All encoding/decoding (USB requires NRZI coding and bit stuffing) is done in real-time, not in the main loop after storing away the raw data stream. • More endpoints, USB descriptors can be better customized. • V-USB comes with a free shared Vendor- / Product-ID pair. • The level of standards conformance is documented (description of limitations and potential problems). • Licensed under the terms of the GNU General Public License or alternatively under a commercial license.