Bus 001 Device 003: ID 19d2:1405 ZTE WCDMA Technologies MSM Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 13ba:0018 PCPlay Barcode PCP-BCG4209 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub usb_modeswitch log. USB_ModeSwitch log from Sun Jan 11 15: Use global config file: /etc/usb_modeswitch.conf Started via upstart Raw args from udev: /1-7 Bus ID for device not given by udev. Trying to determine it from kernel name (1-7). Use top device dir /sys/bus/usb/devices/1-7 USB dir exists: /sys/bus/usb/devices/1-7 SCSI dir exists: /sys/bus/usb/devices/1-7 Warning: SCSI attribute 'vendor' not readable. Warning: SCSI attribute 'model' not readable. Warning: SCSI attribute 'rev' not readable. Use interface /sys/bus/usb/devices/1-7/1-7:1.0 ---------------- USB values from sysfs: idVendor 19d2 idProduct 1405 manufacturer ZTE,Incorporated product ZTE Mobile Broadband Station serial ABCDEF bNumConfigurations 1 bConfigurationValue 1 devnum 3 busnum 1 ---------------- bNumConfigurations is 1 - don't check for active configuration Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz Searching entries named: /usr/share/usb_modeswitch/19d2:1405* Searching overriding entries named: /etc/usb_modeswitch.d/19d2:1405* SCSI attributes not needed, move on.

Mar 14, 2018 - Below you can download zte mf 710 driver for Windows. File name: zte_mf_710.exe. Version: 1.5.5. File size: 11.277 MB Upload source: other. Jan 4, 2012 - Download driver modem zte mf 710! File is 100% safe, uploaded from checked source and passed Kaspersky virus scan!

Mercedes benz starfinder v4. Use overriden config 19d2:1405 from collection /etc/usb_modeswitch.d config: TargetVendor set to 19d2 config: TargetProduct set to 1405 Driver module is 'option', ID path is /sys/bus/usb-serial/drivers/option1! Matched, now switching Command to be run: /usr/sbin/usb_modeswitch -W -D -s 20 -c /etc/usb_modeswitch.d/19d2:1405 -u -1 -b 1 -g 3 -v 19d2 -p 1405 2>&1 Verbose debug output of usb_modeswitch and libusb follows (Note that some USB errors are expected in the process) -------------------------------- Read config file: /etc/usb_modeswitch.d/19d2:1405 * usb_modeswitch: handle USB devices with multiple modes * Version 2.2.0 (C) Josua Dietze 2014 * Based on libusb1/libusbx! PLEASE REPORT NEW CONFIGURATIONS! DefaultVendor= 0x19d2 DefaultProduct= 0x1405 TargetVendor= 0x19d2 TargetProduct= 0x1405 MessageContent='00' NeedResponse=0 Success check enabled, max.

Wait time 20 seconds System integration mode enabled Use given bus/device number: 001/003. Look for default devices.

Bus/device number matched found USB ID 19d2:1405 vendor ID matched product ID matched Found devices in default mode (1) Use interface number 0 -------------------------------- (end of usb_modeswitch output) USB dir exists: /sys/bus/usb/devices/1-7 All done, exit lsusb -v. Modem Port Scan: S0 S1 S2 S3 S4 S5 S6 S7 Modem Port Scan: S8 S9 S10 S11 S12 S13 S14 S15 Modem Port Scan: S16 S17 S18 S19 S20 S21 S22 S23 Modem Port Scan: S24 S25 S26 S27 S28 S29 S30 S31 WvModem: Cannot get information for serial port. Call of duty 6. TtyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up. Sorry, no modem was detected!